Samsung 7 Serie Manuel D'utilisation page 6

Changing the Input Source
Source
Use to select TV or an external input
sources such as a DVD / Blu-ray player
/ cable box / STB satellite receiver.
■ TV / Ext.1 / Ext.2 / PC / HDMI1/
DVI / HDMI2 / HDMI3 / HDMI4 /
AV / Component / USB / AllShare
✎
In the Source, connected inputs will
be highlighted.
✎
Ext.1, Ext.2 and PC always stay activated.
Edit Name
In the Source, press the TOOLS
can set an external input sources name you want.
■ VCR / DVD / Cable STB / Satellite STB / PVR
STB / AV Receiver / Game / Camcorder / PC
/ DVI PC / DVI Devices / TV / IPTV / Blu-ray
/ HD DVD / DMA: Name the device connected
to the input jacks to make your input source
selection easier.
✎
For best cable connection to this product, be sure to use cables with a maximum thickness as below:
When the TV is initially powered on, basic settings proceed automatically.
✎
Preset: Connecting the mains and antenna.
VHF/UHF Antenna
SOURCE
button, and then you
Maximum thickness - 0.55 inches (14mm)
•
Connecting to an Antenna
Satellite Cable
or
English - 6
✎
When connecting a PC to the
port with HDMI cable, you should set the TV
to PC mode under Edit Name.
✎
When connecting a PC to the
port with HDMI to DVI cable, you should set
the TV to DVI PC mode under Edit Name.
✎
When connecting an AV devices to the
IN 1(DVI) port with HDMI to DVI cable, you
should set the TV to DVI Devices mode
under Edit Name.
Edit Favourites
In the Source, press the TOOLS
Favourites. You can set an external input source to
Favourites.
Information
You can see detailed information about the selected
external device.
Refresh
In the Source, If the external devices is not displayed,
press the TOOLS button to select Refresh. Searching
for connected devices.
HDMI IN 1(DVI)
HDMI IN 1(DVI)
HDMI
button to select Edit