Télécharger Imprimer la page

Bosch PMF 2232 Notice D'utilisation page 8

Masquer les pouces Voir aussi pour PMF 2232:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
6
● Skin ailments or injuries, particularly open
wounds
● Inflammation of the feet or lower legs
● Vein conditions, thrombosis or varicose
veins
● Bruises or pain in the feet, legs or joints
● TB or cancers
The appliance must not be used without
consulting a doctor in advance.
Use of the foot spa is not a substitute for
therapy carried out by a physician.
Application
General
The gentle oscillations and the bubbling
water relax muscles and reinvigorate tired
feet.
The attachments supplied pamper and
massage the feet.
A session should not last longer than 10
minutes.
The foot bath can be used with or without
water.
Sit down during use, and under no
circumstances stand up with your feet in
the spa!
The appliance is not designed to take the
full weight of the user.
Use
The appliance must not be connected to the
power supply during filling or emptying.
● Uncoil the lead and place the foot spa on
the floor in front of a chair.
● Check whether the appliance is switched
off. The rotary selector 5 must be set to
"0".
● Fill with warm water to the
● Plug in the power cord.
● Sit down and place the feet in the foot
bath 1, ensuring you are in a comfortable
position.
Robert Bosch Hausgeräte GmbH
PMF_2232_091204.indd 6
● Select the desired level from 1­3 with the
rotary selector 5 and pamper your feet
(max. period of use approx. 10 min).
– L evel 1
– L evel 2
– L evel 3
● Switch off the appliance when you have
finished bathing your feet. To switch off
the appliance, set the rotary selector 5 to
"0".
● Remove the feet from the foot bath and
unplug the lead. Lift the appliance by the
indented grips  and pour out the water
via the cutout at the front.
Tip: To ensure special relaxation and care
for the feet, a non­foaming, non­oily care
preparation can be added to the water.
Use of accessories
● Affix the desired attachment a, b or c to
the drive socket 6.
● Press down the affixed attachment lightly
with a foot. The attachment rotates.
Important: Do not prevent rotation through
excessive pressure.
● Treat the particular part of the foot with
the appropriate attachment.
– T he soles of the feet can be massaged
– T he "pumice stone" attachment c
marking.
Tip: Flakes of dead skin can be readily
~
removed with the "pumice stone" after a
foot bath, when the skin is very soft.
m
switches on the vibration
massage.
n
starts the bubble function,
and switches on the heating to keep the
water warm. It is not possible to heat up
cold water by this method.
mn
combines levels 1 and
2.
using the massage brush a and the
massage ball attachment b.
is suitable for the gentle removal of
hardened skin.
en
04.12.2009 17:03:22

Publicité

loading