Indications Figurant Dans Ce Mode D'emploi - Kostal Smart Energy Meter Instructions D'utilisation

Informations générales
1 1 2 3

1.4 Indications figurant dans ce mode d'emploi

Installation
Install a line circuit breaker into the mains cable
between the inverter and the feed meter to
secure it against overcurrent.
In countries in which a second PE connection
is prescribed, connect this at the marked place
on the housing.
Connecting AC-side
Connect the wires of the mains cable to the
AC terminal in accordance with the labelling.
For connection with a computer or with a
computer network. Connect several inverters
to a network for data retrieval.
Fig. 3 : consignes de sécurité figurant dans ce mode d'emploi
Pictogramme d'indication dans le corps du texte
1
Avertissement
2
Indication d'information
3
Autres indications
4
Le corps du texte comporte des indications. Dans ce
mode d'emploi, une distinction est faite entre les aver-
tissements et les indications d'information. Une icône
identifie toutes les indications sur la ligne de texte.
© 2020 KOSTAL Solar Electric GmbH
4 5
DANGER
Risk of death due to electrical
shock and discharge!
De-energise the device,
secure it against being
restarted and wait five
minutes so that the capaci-
tors can discharge.
IMPORTANT NOTE
To connect the AC cables,
the inverter is equipped with
spring-loaded terminal strips.
INFO
For connection with a
computer, an Ethernet cable
of category 6 is to be used.
13