Jula anslut 019880 Mode D'emploi page 12

EN
3. Set the required colour temperature: see
the table Optional colour temperature.
FIG. 3
4. Align the lugs on the lamp to the slots on
the ceiling bracket and press the lamp in
place over the bracket.
FIG. 4
5. Turn the lamp to lock it in place on the
bracket.
FIG. 5
OPTIONAL COLOUR TEMPERATURE
The product has three colour temperature
settings, which are set with a selector.
Set the required colour temperature
before installation.
Mode
CW
NW
WW
USE
MOTION DETECTION
• The product switches off automatically
after three seconds if there is no activity.
• The product is controlled by a motion
detector and reacts to persons at a
distance of about five metres, assuming
that it is installed no more than seven
metres above the ground.
12
Colour temperature
6000 K
4500 K
3000 K