Choosing The Power Supply; Open The Box - Videotec WAS Manuel D'instructions

Take the plug out of the tank, along with any pumps
and level gauges. Remove the tank from the metal
cage.
Attach the metal cage (01) firmly to a wall using the
holes provided for this (02).
Fig. 3
Water tank 5l (1.3gal), 5m (16ft) delivery.
Fig. 4 Water tank 23l (6gal), 5m (16ft) or 11m (36ft) delivery.
Fig. 5 Water tank 23l (6gal), 30m (98ft) delivery.
8

6.3 Choosing the power supply

Depending on the version, the device can be
provided with different power supply voltages. Their
value is shown on the product identification label.
01
02

6.4 Open the box

01
Open the cover of the water-proof box and connect
as described below.
02
Fig. 6
01
02
Electrical connections must be performed
with the power supply disconnected and
the circuit-breaker open.
When commencing installation make sure
that the specifications for the power supply
for the installation correspond with those
required by the device.
Check that the power supply socket and
cable are adequately dimensioned.
Use a power cable that is suitable for
outdoor use (example: H05RH-F).
The operation is performed only for a pump
with a 5m or 11m delivery head.
MNVCWAS_2222_EN