MT Logic Draagbare DV-1825MTB Mode D'emploi page 13

17. Step
Press STEP once to pause playback, Form this station, press STEP to advance one
video frame.
18. Menu
Accesses menu on a DVD disc, PBC on/off switch for VCD.
19. Audio
DVD: Press AUDIO repeatedly during playback to hear a different audio language
or audio track, if avilable.
VCD: Press AUDIO repeatedly during playback to hear a different audio channel
(Stereo, Left, or Right).
20. Play/pause
Press PLAY/PAUSE once to pause playback, pressing PLAY/PAUSE second time
will resume the playback.
21. Stop
When this buttom is pressed once, the unit records the stopped point,from
where playback will resume if ENTER is pressed after wards. But if STOP button is
pressd again instead of ENTER button, there will be no resume function.
22. Return
Return to upper page.
23. Vol +
Adjust VOLUME.
24. Reverse Skip
Go to previous chapter/ track to the beginning.
25. Forward Skip
Go to next chapter/ track.
26. button
Press BUTTON allow skipping ahead at 5-level speed(X2->X4->X8->X20),
press ENTER button return to normal playback.
27. button
Press BUTTON allow skipping back at 5-level speed(X2->X4->X8->X20), press
ENTER button return to normal playback.
SETUP MENU SETTING
System Setup Page
Press SETUP button to get the setup menu. Use direction buttons
the preferred item. After finishing settings, press SETUP again to normal display.
System Setup
TV System
Selecting the color system that corresponds to your TV when AV output. This DVD
Player is compatible with both NTSC and PAL. PAL - Select this if the connected TV is
PAL system. It will change the video signal of a NTSC disc and output in PAL format.
NTSC - Select this if the connected TV is NTSC system. It will change the video signal
of a PAL disc and output in NTSC format.
Power Resume
This function is used to turn the last memory on or off.
TV Type
Selects the aspect ratio of the playback picture.
• 4:3 PS: if you have a normal TV and want both sides of the picture to be trimmed
EN
Instruction Manual
to select
13