Motorola RLN5929 Mode D'emploi page 7

2. Route the wire with the contact terminal through
connector as shown in Figure 2a, or for
applications with multiple accessories connected
to the mobile radio, route wires as shown in
Figure 2b and secure with a cable tie after
completing step 3.
Figure 2b. Optional Strain Relief
3. Insert cable wire with the contact terminal into the
pin #23 of the accessory connector as shown in
Figure 3.
4. Secure the cable wire with connector lug to
vehicle chassis ground.
Figure 2a. Wire Strain Relief
Optional strain relief with tie wrap
5