Motorola RLN5929 Mode D'emploi page 6

Switch Actuator Shaft
Rubber Cap
3283316K01
12.7mm
(1/2 inch)
Threaded Shaft
Figure 1. Emergency Foot Switch Detail
Making Final Connections
The emergency foot switch kit includes a cable. One
end of the cable has two exposed wires, the other
end has two wires, one with a lug and the other with a
contact terminal attached. Refer to Figure 3, and
make connections as follows:
1. Connect the two wires from the foot switch to the
cable (end with exposed wires), taking care to
insulate the connection. Polarity is not important.
Hex Nut
2983317K01
Lockwasher
0400114522
Lockwasher
0400114522
Hex Nut
2983317K01
4