How.to.use - mySodapop Jerry Mode D'emploi

HOW TO USE:
CO2 cylinder installation:
1.. . T ake.the.mySodapop.machine.and.CO2.cylinder.out.of.the.box.
2.. Invert.the.machine.and.place.it.on.a.flat,.sturdy.surface.
3.. Remove.the.seal.and.cap.from.the.CO2.cylinder..Insert.CO2.cylin-
der.into.the.opening.of.the.hollow.space.at.the.base.of.the.ma-
chine.and.turn.the.CO2.cylinder.clockwise,.while.applying.gentle.
pressure.until.it.is.firmly.held.in.place..Hand-tighten.only,.do.not.use.
tools.
4.. Place.your.machine.back.in.the.upright.position..You.are.ready.to.
carbonate.water.
.
26