Vision TECHCONNECT TC-HDMIW30C Guide De L'utilisateur page 6

CHANNEL ADJUSTMENT
The HDMIW30C version of this product does not use Dynamic Frequency Selection. Instead the
user can adjust channel manually to avoid interference from other WIFI devices.
This version of the product allows multiple sets to be used close to each other without
interference, as long as they are on separate channels.
INSTALLATION NOTES
1. NORMALLY POWER FROM HDMI WILL BE SUCCICIENT TO POWER TX
The Tx needs 500-1000 milli-amps (mA) to operate. Laptops are only obliged to provide
55mA through the HDMI port but they often provide more.
2. IF NOT USE USB CABLE TO GET SUPPLEMENTARY POWER FROM A USB PORT
Use USB cable provided. It WILL NOT work with cheap USB cables
3. IF THAT'S STILL NOT ENOUGH AN EXTERNAL POWER SUPPLY IS INCLUDED.
DISPLAY SLEEP
The Rx will stop outputting HDMI if no source is present for 10 minutes. This allows the display
to go to sleep when the source is off.
Wifi Channel Adjustment
TC-HDMIW30C_manual_en.doc
6