Vision TECHCONNECT TC-HDMIW30C Guide De L'utilisateur page 5

TRANSMITTER ("Tx")
1. HDMI input
2. IR Output (IR blaster plugs in here, allows source remote control to be used at distant
display)
3. BLUE Power indicator
4. Micro-USB Power 5V2A (10w minimum)
5. RED Link indicator
a. slow flashing = performing handshake
b. fast flashing = transmitting data
c. on all the time = error
1
RECEIVER ("Rx")
1. Phoenix connector power input
2. GREEN Link indicator
a. solid = good connection with Tx
b. off = poor or no connection with Tx
3. GREEN Data transmitter indicator
a. slow flashing = performing handshake
b. fast flashing = transmitting data
c. on all the time = error
4. HDMI output
5. IR Input (IR receiver plugs in here)
1 2
4
5
3
2
3
4
5
TC-HDMIW30C_manual_en.doc
5