Dimensions; Technical Specifications - Carel pAD Manuel D'utilisation

Power supply (to EN60730-1)
Classification as per UL873
Operating conditions
Storage conditions

Dimensions

Environmental pollution
Degree of pollution
Category of resistance to heat and fire
Software class and structure
Index of protection
Ball pressure test temperature on the plastic used for the
case
Classification according to protection against electric shock
(EN60703-1)
Period of electrical stress across the insulating parts
Protection against short-circuits
Immunity against voltage surges
Cross-section of the wires
Precision of temperature measurement
Precision of humidity measurement (in the models fitted
with humidity probe)
Dimensions:
CAREL reserves the right modify or change its products without prior warning
pAD +030220870 - rel. 1.2 18.01.2013

7. TECHNICAL SPECIFICATIONS

24 Vac + 15 %, 50/60 Hz 70 mA 1.5 VA
or 31 Vdc + 29 % 70 mA
Power supply input:
24 Vac, 50/60 Hz, Class 2
25.5 – 36.25 Vdc, Class 2
Power consumption, max 1 watt
Outputs: RS485 serial link, Class 2
0T50 °C; 10 to 85% rH non-condensing
-20T70 °C; 0 to 85% rH non-condensing
See the figure below
Normal
2
A
A
IP30
100 °C
3, to be integrated into class 1 or 2 appliances
long
Must be guaranteed by the manufacturer of the appliance that pAD is integrated into or by the installer
Category 1
2
From 0.5 to 1.5 mm
+/-2 °C
+/-10 % rH
83.5 mm
28
ENG