Important - Porter & Charles SOPS60-1 Guide Rapide D'utilisation

2. Gently pour 200 ml of water into the bottom
of the oven cavity.
INFoRMaTIoN
For best results, add a teaspoon of mild
washing up detergent to the glass of water
before pouring onto the cloth.
3. Turn the control dial to the
4. You will hear a beep indicating that the Steam
Clean Assist cycle has started. The
®
bol will flash slowly and the time remaining to
complete the cycle will appear on the display.

IMpoRTaNT

The duration of this cycle cannot be changed.
To stop the cycle before it is finished, turn
the control dial to the
position.
sym-
position.
5. When the cycle is finished, the oven will turn
itself off, an alarm will sound and the
symbol will flash quickly.
IMpoRTaNT
Do not open the oven door until the Steam
Clean Assist function is complete.
®
The cooling cycle is necessary for the func-
tion to work properly.
6. Touch any sensor with your fingertip to stop
the alarm and turn off the
7. Turn the control dial to the
8. Any traces of dirt and excess water can now
be removed from the oven with the damp
cloth.
The Steam Clean Assist
at a low temperature. However, cooling times
can vary depending on the room temperature.
WaRNING
Before touching the inside surface of the
oven, make sure that it has cooled properly.
If a deeper clean is required after using the
Steam Clean Assist
®
tergents and non-abrasive sponges.
symbol.
position.
function takes place
®
function, use neutral de-
User's Guide
English
23