Publicité
Les langues disponibles
Les langues disponibles
Polaris 2
LED Strobe Laser Light
Introduction
Thank you for buying the Polaris 2, please read these operating instructions carefully. Familiarize
yourself with its basic operation, it will help to optimize its performance. Please keep this manual for
future reference.
The Orion ORFX108 is a highly effective intelligent LED multi-effect devise with strobe, it's useful
for mobile DJs and/or installation applications. Designed for indoor use only, the unit should never
be exposed to rain or excessive moisture. Although properly vented and cooled, the Polaris should
always be used in a ventilated space, away from external heat sources. The ORFX108 should never
be connected to any kind of external AC dimmer, and will operate only at intended voltage. There are
no user serviceable parts inside. Should the ORFX108 fail, it should be referred to qualified service
technician for repair.
The Orion ORFX108 can be run in manual operation from the controls on the back panel (see
operation guide below) or via DMX512 controller through the XLR inputs provided.
XLR Configuration
This unit has been tested before being shipped to you, no assembly required.
Parts Included
1 x LED Laser Light
1 x Power cable
1 x User manual
LED Laser Light
2
1
Pin 2 – Data Negative
3
Pin 3 – Data Positive.
Power Cable
Pin 1 – Ground
1
1
2
3
SAVE THIS MANUAL FOR FUTURE REFERENCE
Manuel du Propriétaire
CONSERVEZ CE MANUEL POUR RÉFÉRENCE FUTURE
Owner's Manual
Publicité
