Publicité
Les langues disponibles
Les langues disponibles
US
Read all instructions before using or installing this product.
Technical data
– Maximal load each shelf:
– Supply voltage:
– Required electrical outlet:
– Max. power consumption:
Prod. No.:
- 14312 171151:
- 14313 171151:
- 14314 171151:
Maximal load mirror cabinet total:
- 14312 171151:
- 14313 171151:
- 14314 171251:
– Degree of protection:
– Ambient conditions:
Operating temperature
Storage temperature
– Luminous color
Mounting dimensions, see page 11 and 12.
Modes
The device can be operated in two modes.
Mode 1 (ex works):
Lighting On/Off at the device button (Off
automatically after power returns).
Mode 2:
Lighting On/Off at the external light switch (Off
automatically after power returns).
CAUTION: Risk of personal injury: This
product is very heavy. Get assistance lifting the
cabinet.
Before installation check whether the fastening materials
included are suitable for the anchoring base. The fasten-
ing materials are suitable exclusively for stud walls with
timber constructions or for drywall constructions with
timber wood reinforcement.
Installation, see fi gure 1 onwards on page 13.
• Check the mounting position, see fi gure 1.
WARNING - GROUNDING
INSTRUCTIONS
This product must be connected to a grounded me-
tal, permanent wiring system, or an equiment-groun-
ding conductor must be run with the circuit con-
ductors and connected to the equipment-grounding
terminal or lead on the product.
Wiring diagram, see fi gure 2 on page 13.
• Connect the mirror cabinet to the power supply,
see fi gure 3a/3b.
• Place the mirror cabinet in the installation opening,
see fi gure 4.
max 3.3 lb
120 V AC / 50/60 Hz
15 A / 1800 VA
Width
Weight
Light
31-1/2"
52.92 lb
54 W
35-7/16"
59.53 lb
54 W
39-3/8"
63.93 lb
54 W
79.37 lb
85.98 lb
90.39 lb
NEMA 1
32° – 113° F
-40° – 158° F
2700 – 6500 Kelvin
• Fix the mirror cabinet in the installation opening
with the screws, see fi gure 5.
• Glue the batten under the mirror cabinet to cover
the gap that may be present, see fi gure 6.
• Place the glass shelf holders in the mirror cabinet,
see fi gure 7.
• Place the glass shelves in the mirror cabinet,
see fi gure 8.
• Observe the maximum load on the glass shelves
(3.3 lb), see fi gure 9.
• Adjust the doors of the mirror cabinet, see fi gure
10 –12 on page 16 and 17.
Operation
The mirror can be optionally actuated similar
to a toggle switch with a button on the mirror
(A) or with an external light switch (B), see
circuit diagram fi gure 2 on page 13.
Button functions
Button
Function
Light on/off
• Pressing the button switches the mirror cab-
inet on with the selected settings. The white
LED goes off.
• Pressing the button again switches the mirror
cabinet off. The white LED lights up.
To change mode
• Switch off the refl ector.
• Press the button and hold it down for 15
seconds.
- The light comes on again if the mode has
been changed.
Repeat the procedure described to re-enable
mode 1.
B
A
3
Publicité
