Télécharger Imprimer la page
Viega PureFlow Instructions Produit
Masquer les pouces Voir aussi pour PureFlow:

Publicité

Liens rapides

Product Instructions
Viega PureFlow
Press
®
Fire Sprinkler Bracket
1
A
B
6
7
13
12
A
C
EN
Viega PureFlow Press
Fire Sprinkler Bracket
Viega products are designed to be
installed by licensed and trained plumbing
and mechanical professionals who are
familiar with Viega products and their installation.
Installation by non-professionals may void
Viega LLC's warranty.
Do not remove factory packaging until
ready to install fittings.
1
Select the desired mounting orientation for the Fire
Sprinkler Bracket based on the construction type
present. See Viega Fire Sprinkler Manual for more
detailed mounting instructions.
2
Remove the bracket cover and any plastic
wrapping from the fire sprinkler adapter.
2
A
C
8
A
C
14
A
A
C
C
3
Attach fire sprinkler head to fire sprinkler adapter
according to manufacturer's instructions.
4
Place the fire sprinkler adapter into the bracket as
shown.
5
Ensure the fire sprinkler adapter is fully inserted
into the bracket before installing the bracket cover.
6
Place the bracket cover onto the locking lugs.
7
Turn the cover clock wise ⅛th of a turn until it
snaps into place.
8
Verify the cover sets flush with the installed fire
sprinkler adapter and is square with the bracket.
9
Square off tubing to proper length. Uneven,
jagged or irregular cuts will produce unsatisfactory
connections.
10
Insert PureFlow Press fitting with attached sleeve
into tubing and engage fully.
11
Ensure full tubing insertion at view holes in
attached press sleeve. Full insertion means tubing
must be completely visible in at least two view
holes and partially visible in the one.
12
Position press tool perpendicular over Press
Sleeve and close tool jaws to engage ratchet.
13
Close handles, using trigger to reduce grip span if
desired.
Viega LLC
585 Interlocken Blvd.
Broomfield, CO 80021
Phone (800) 976-9819
www.viega.us
3
A
C
9
A
C
15
EN
Product Instructions
Viega Press Fire Sprinkler Bracket
This document is subject to updates. For the most current Viega
technical literature please visit www.viega.us.
ES
Instrucciones del producto
Soporte de rociador contra
incendios de prensa Viega
Este documento está sujeto a actualizaciones. Para obtener la
documentación técnica más reciente de Viega, visite www.viega.us/es.
FR
Instructions produit
Support de gicleurs de protection
incendie de Viega
Le présent document est soumis à des mises à jour. Pour consulter
les manuels techniques Viega les plus récents, reportez-vous au site
Web www.viega.ca.
PI-PF 566261 1119 PureFlow Press Fire Sprinkler Bracket (EN ES FR)
4
6
5
A
C
10
6
11
A
C
14
Extend handle and continue ratcheting until
automatic tool release occurs at proper
compression force.
15
Turn screw for emergency release.
WARNING!
The connection is not leakproof when
the tool has been opened by emergency
release.
A
C
A
C

Publicité

loading

Sommaire des Matières pour Viega PureFlow

  • Page 1 Viega les plus récents, reportez-vous au site Web www.viega.ca. Phone (800) 976-9819 www.viega.us PI-PF 566261 1119 PureFlow Press Fire Sprinkler Bracket (EN ES FR) Attach fire sprinkler head to fire sprinkler adapter Extend handle and continue ratcheting until according to manufacturer’s instructions.
  • Page 2 Les coupes inégales, dentelées ou irrégulières irregulares producirán conexiones incorrectas. causeront de mauvais raccordements. Inserte el accesorio PureFlow Press en la tubería, Insérez le raccord PureFlow Press avec le con la manga de prensar incorporada, y encájelo manchon fourni dans le tuyau et enfoncez-le por completo.