Tascam BD-MP4K Mode D'emploi page 41

6.
Change the size.
Use the k and j cursor buttons to select the Size, and
press the ENTER button to confirm. The size options
(Large/Small) will be shown.
Use the k and j cursor buttons to select "Large" or
"Small", and press the ENTER button to confirm.
NOTE
Different sizes cannot be selected for speakers in a pair.
7.
Change the trim.
Use the k and j cursor buttons to select "Trim", and
press the ENTER button to confirm. This opens the Trim
Adjustment Screen.
C example
Use the l and ; cursor buttons to change the value, and
press the ENTER button to confirm.
Adjustment range: 0 – ±10 dB (in 0.5dB increments)
NOTE
For pairs, only values that show a g or t cursor can be
changed. Use the k and j cursor buttons to change them.
8.
Change the delay.
Use the k and j cursor buttons to select "Delay", and
press the ENTER button to confirm. This opens the Delay
Adjustment Screen.
C example
Use the l and ; cursor buttons to change the value, and
press the ENTER button to confirm.
Adjustment range: 0 – 1000 cm (in 5cm increments)
NOTE
i The unit is centimeters. Measure the distances from each
speaker to the listing point, calculate their differences and
use these values. (The delay time is 29μsec/cm.)
i For pairs, only values that show a g or t cursor can be
changed. Use the k and j cursor buttons to change them.
41
TASCAM BD-MP4K