Display Language - Tascam BD-MP4K Mode D'emploi

Display Language

Function
OSD
Disc menus
Audio*
Subtitles*
* These functions can only be used with contents that support them.
Playback
Function
Disc Auto Playback
Closed Captions
Angle Mark
PIP Mark
Secondary Audio Mark
Last Memory
Options
English/Japanese
Various languages/More
Various languages/More
Various languages/More/Off
Options
p On (Repeat On)
p On (Repeat Off)
p Off
On/Off
On/Off
On/Off
On/Off
On/Off
Explanation
Set the language used for unit function and information screens to
English or Japanese.
Set the language used for option menus during playback.
Set the audio language used during playback.
Set the language used for subtitles during playback (or turn
subtitles off ).
Explanation
Automatic playback and repeat playback functions for discs can be
set.
p When automatic playback is on, playback will start automatically
if the disc to be played is loaded in the disc tray and the power
is turned on, as well as if a disc is changed and the disc tray is
closed.
p When the automatic playback repeat function is on, after a disc
is played automatically, playback will repeat continuously.
i Repeat On: Both automatic and repeat playback functions
are enabled.
i Repeat Off: The repeat playback function is off, but automatic
playback is enabled.
p When set to off, both automatic and repeat playback functions
are disabled.
ATTENTION
o When the automatic playback function is enabled, playback
will start automatically when a disc is loaded. For this reason,
be careful during the following operations.
i Making settings on the Home Screen
i Playing files on an SD card, USB flash drive or network
drive
o Automatic playback is not supported for SD cards, USB flash
drives or network drives. This function can only be used with
discs that support it.
Set whether or not the function to subtitle video disc audio is
enabled.
Set whether or not an icon is shown when angle operations are
available during video disc playback.
Set whether or not an icon is shown when picture-in-picture
functions are available during video disc playback.
Set whether or not the secondary audio icon is shown or not.
Set whether or not the unit stores the last playback positions of
discs in its internal memory.* When this function is on, playback will
start from the stored position when a disc is played again.
NOTE
i These functions can only be used with contents that support
them.
i If the HOME button is pressed during playback, the playback
position will not be saved.
i This unit can save positions for five discs maximum. When
the total number of discs would exceed five, the record for
the disc played least recently will be replaced by a record for
the most recent disc.
19
TASCAM BD-MP4K