Telcoma Automations FM420 Instructions Pour L'utilisation Et La Programmation page 40

GB
If the letter
the transmitter does not recognise the other mode as a valid
version for duplication.
If the transmitter code learning phase is successful, the letters
flash on display.
Press the central key to confirm transmitter duplication. The text
appears briefly on display.
ENTERING A FAMILY USING PRGNOIRE (for NOIRE20 only)
From any selected channel, press and hold key 3 and at the
same time press key 1 four times.
Release key 1.
The letter
40
Position the remote control to be
copied below the new remote control
as shown in the figure, then transmit
the codes using one of the
transmission keys (e.g. key 2).
flashes more quickly on display this means that
appears briefly on display