Telcoma Automations FM420 Instructions Pour L'utilisation Et La Programmation page 39

GB
Press key 2 (indicated in the drawing) or 4 until
Press the central key to confirm.
To disable CETAP compatibility, repeat the operations above and
select
- Firmware Version
Press key 5 to select
to the radio control firmware version.
DUPLICATING A RADIO CONTROL (for EDGE20 only)
This procedure describes how to copy all codes of another EDGE20 or
previous model (TANGO20) onto an EDGE20 radio control.
From any selected channel, press and hold key 3 and at the
same time press key 1 four times.
Release key 3.
The letter
. This displays a number corresponding
starts flashing on display.
is displayed
39