General; Introduction; Features - Miranda picoLink Serie Notice D'installation Et D'utilisation

1 General

1.1 Introduction

The FEO-171p is a stand-alone electrical to optical solution for transmitting digital video (SDI,
270 Mbps) signals over a single mode fiber optic link. The FEO-171p can be used for short and
medium haul applications with distances up to 10km. The FEO-171p can be used in conjunction
with the FOE-171p picoLink Optical to Electrical Receivers. The fiber optic picoLink can be used
stand-alone or can be mounted in a special rack-mount tray that turns the picoLink fiber
converters into an electrical to/from optical patch field.
Cost effective, compact and lightweight
4:2:2 IN
Figure 1: Diagram

1.2 Features

•
Supports SDI 270 Mbps SMPTE 259M-C
•
Conforms to SMPTE 297M
•
Laser Transmitter for typical distances up to 10 km
•
Single-mode 1310 nm with SC/PC connector
•
Valid input signal indication
•
Stand alone mounting
•
Optional rack mount tray turns picoLink into optical patch field
Optical
FEO-171p Functional Block Diagram
4
Tx
FEO-171p
FIBER
OUT