Alecto LE-360 Mode D'emploi page 13

HOW TO USE
Intended use:
The LE-360 is only suitable to show LED light-effects privately. The LE-360 is not for
industrial application.
Functioning:
If you connect the mains power supply into the socket plug (100-240V) , the LE-360
activates itself automatically.
The display shows the number of the previous selected effect and this light-show will
therefore be played.
How to set the effect:
The LE-360 has 7 preselected programs and 2 ambient sound effects.
• These settings can be selected by pressing the MENU button repeatingly:
• The speed of effect 1-7 can be set by the UP and DOWN buttons.
• The ENTER button has no user function.
-
-
-
-
-
-
-
-
-
: Red activated
: Green activated
: Blue activated
: 3 colours alternating
: 7 colours alternating
: 7 colours, steady sequence colours
: 7 colours, steady sequence colours and flashing effect
: Ambient sound effect 1 (the harder the ambient sounds are the
faster it will flash)
: Ambient sound effect 2 (the harder the ambient sounds are the
faster it will rotate)
13