CANCELLI AUTOMATICI Z 24 Serie Manuel page 38

11.4 - MEMORISATION
CH1 = Channel for direct command to a function of the the gearmotor's card, ("open only / "open-close-invert" or "open-stop-close-stop"
command, depending on the choice made on DIP switches 2 and 3).
CH2 = Channel for direct command an accessory device connected to B1-B2.
1) Keep the CH1 button on the electronic card pressed. The LED fl ashes.
CH1
LED flashing
2) Press the transmitter button you wish to memorise. The LED will stay on to show memorisation has been successful.
LED on
T1
3) Repeat the points 1 and 2 procedures for the "CH2" button associating this to another button on the transmitter.
CH2
T2