Replacing Of The Illuminant - Pkm KS 117.4 A++ UB Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1. Replacing of the illuminant

2.
WARNING!
unplug
the
replacing the illuminant.
3. Illuminant-data: 220~240V, 15W
4. Unscrew the cover.
5. Press the cover and slide it backwards
6. Replace the illuminant and reinstall the
cover.
7. Trouble shooting
POSSIBLE CAUSE
 The plug of the appliance is not
connected to the socket.
 The plug has become loose.
 The socket is not supplied with
energy.
 The fuse is switched off.
 The voltage is too low.
 Incorrect energy supply.
 The appliance has been switched off
for a while.
 Too much or too hot food in the
appliance.
 Doors opened too often or too long.
 The door was frequently opened.
 The door is not properly closed.
 Encrusted ice inside the appliance.
 The current temperature setting is
too warm
 Warm or hot food inside the
appliance.
 The appliance is overfilled.
 The door seals are damaged.
Switch
off
appliance
MALFUNCTION
The appliance does not work at all.
The compressor does not work at all.
The compressor operates for too long.
Unsatisfactory cooling capacity.
and
before
 Check the corresponding socket by
connecting it with another appliance.
 Check the fuse box.
 Compare the data on the model
plate with the data of your energy
supplier.
 Check the energy supply.
 The appliance needs some time to
reach the preset temperature.
 Remove any hot food.
 Do not open the door too often/too
long.
 Select a different setting if necessary.
 Check the door/door seals.
 Defrost the appliance.
46
MEASURE

Publicité

Table des Matières
loading

Table des Matières