WELDY miniwelder geo2 Notice D'utilisation page 10

Application miniwelder geo2
12/12/12 mm
Application miniwelder tex2
30 mm
Technical data
Voltage
Power consumption
Frequency
Wedge temperature max.
Emission level
Weight
Speed
Material thickness
Max. overlap
Mark of conformity
Protection class I
Technical data and specifi cations are subjected to change without prior notice.
10
Note: For welding materials made of PVC a special machine
with a steel wedge must be used.
Intended use:
The miniwelder geo2 is designed for overlap welding of thinner
geo membranes made from: LDPE, HDPE, PP, PVC, EVA.
Any use other than or beyond that described above is deemed
non-intended.
Areas of use:
Civil engineering, landfills, expressways, water-proofing
works, reservoirs, artificial lake and pond construction,
production of covers, fish farms, agriculture, biogas reta-
ining bags, etc.
Options:
Steel pressure rollers with test channel, wedge type GEO, hold-
down rollers, outdoor travel rollers, pressure spring brown.
Note: For welding materials made of PVC a special machine
with a steel wedge must be used.
Intended use:
The miniwelder tex2 is designed for overlap welding of materi-
als made from; textiles and coated textiles and thinner syn-
thetics from 100 microns up made from PE, PP, PVC, EVA.
Any use other than or beyond that described above is deemed
non-intended.
Areas of use:
Production of sealing barriers and covers in agriculture, ponds,
greenhouses, tarpaulins, architecture.
Options:
Silicon rollers without test channel, wedge type TEX, hold
down bar, indoor travel rollers, pressure spring yellow.
V~
W
Hz
°C
LpA (dB)
kg
m/min
mm
mm
230
800
50/60
480
60
3.5 (tex2), 3.9 (geo2)
0.2–7.5
0.1–1.5 (depending upon material type)
max. 1.0 HDPE
100
1