Stand By Mode; Purge; Cleaning And Maintenance - Delta QUICK Mode D'emploi

ORIGINAL SETTINGS

PURGE

Frequent use of the "Purge" operation ensures improved beverage quality and proper
equipment maintenance.
• Pressing the espresso button and the long
drinks button until the LED blinks
(Programming mode).
• Pressing again the espresso button and the long
drinks button until the LED blinks 3 times
in confirmation.
The appliance switches off automatically.
• Place a coffee cup and without inserting a
capsule, the espresso button to pump the
water through the machine.
The appliance switches off automatically.
When the LED stops blinking the machine
is ready to use.

STAND BY MODE

• The machine switches off automatically after 3 minutes of inactivity, the LED turns off.
If you wish, you can always switch the machine off by pressing the espresso button until
the LED turns off.

CLEANING AND MAINTENANCE

Warning: Check if you unplugged the appliance from the power outlet before you clean it.
To prevent electrical shocks, do not immerse the cord, plug or appliance in water or any
other liquid. Do not use any abrasive or solvent-composed cleaning agent.
• Empty the deposit for used capsules and the deposit for liquids frequently.
• Use a dry cloth to clean the water tank.
• The used capsules collection tank, the cup tray and the drip basin may be washed
in water and dried with a soft cloth.
• Clean the outer surfaces of the equipment with a damp cloth.
• You must never immerse the equipment in water or any other liquid.
QUICK
31