26. Alarm decal
27. Extra blades
28. Low voltage cable
29. Couplers for the loop wire
30. Loop wire for boundary loop and guide
10
wire
11
31. Stakes
32. Connectors for the loop wire
1.11 Symbols on the product
These symbols can be found on the product.
Study them carefully.
WARNING: Read the
user instructions before
operating the product.
WARNING: Disable the
product before working
on or lifting the machine.
WARNING: Keep a safe
distance from the ma-
chine when operating.
Keep your hands and
feet away from the rotat-
ing blades.
WARNING: Do not ride
on the machine. Never
put your hands or feet
close to or under the
machine.
Never use a high-pres-
sure washer or even
running water to clean
the product.
Use a detachable power
supply as defined on the
rating label next to the
symbol.
9
Is a part of the Installation kit which is purchased separately.
10
Is a part of the Installation kit which is purchased separately.
11
Is a part of the Installation kit which is purchased separately.
12
Is a part of the Installation kit which is purchased separately.
1418 - 004 - 10.03.2020
9
12
1.12 Symbols on the battery
This product conforms to the
applicable EC Directives.
Noise emission to surroundings.
The product's emissions are set
Technical data on page 25
out in
and on the rating plate.
It is not permitted to dispose this
product as normal household
waste. Ensure that the product is
recycled in accordance with local
legal requirements.
The chassis contains components
which are sensitive to electrostatic
discharge (ESD). The chassis
must also be resealed in a
professional manner. For these
reasons the chassis shall only be
opened by authorized service
technicians. A broken seal can
result in the entire or parts of the
guarantee no longer being valid.
The low voltage cable must not be
shortened, extended or spliced.
Do not use a trimmer nearby the
low voltage cable. Be careful when
trimming edges where the cables
are placed.
Read the user instructions.
Do not discard the battery into fire
and do not expose the battery to a
heat source.
Introduction - 9