Publicité
Les langues disponibles
Les langues disponibles
EN
DESCRIPTION
- Sound column with configurable directivity, designed to concentrate sound in the audience area and
improve speech intelligibility.
- High performance, high power, multi-channel Class D amplifier providing high sound quality and high s/n
ratio.
- Its features make it very suitable for both indoor and outdoor PA installations, as it has water protection
(IP-65), aluminium grille and body and includes stainless steel supports.
- The integrated DSP allows adjustment of the beam tilt (±45°), focal length selection up to 30 m which
automatically sets the beam width (95° to 5°) and 15-band graphic equalization, all configurable via IP via
web browser.
CONTROLS
REAR PANEL
1.- CONTROL: LAN connection input for column configuration with web application, RJ-45 connector.
2.- 100 V INPUT: 100 V line signal input, waterproof connector.
3.- 0dB INPUT: balanced line signal input, waterproof connector.
4.- SIGNAL/OUTPUT: balanced line input and output, waterproof connector.
5.- ~220V/50Hz: 115/230 V AC power input (internally selectable).
SETUP
1.- Connect the column to a router using a network cable. The network should be:
- mask network: 255.255.255.0
- gateway: 192.168.1.1
2.- Connect a PC to the same router and make sure that you have an IP address within the indicated
network and different from the IP in the column (default 192.168.1.30) and the IP of the router.
3.- Turn on the column. By default the IP address of the columns will be 192.168.1.30.
Control
100V Input
0dB Input
Signal Output
~220V/50Hz
(Power 240W)
- 2 -
1
2
3
4
5
Publicité
