Turning your Mini PC off
If your Mini PC is unresponsive, press and hold the power button for at least
four (4) seconds until your Mini PC turns off.
Putting your Mini PC to sleep
To put your Mini PC on Sleep mode, press the Power button once.
Entering the BIOS Setup
BIOS (Basic Input and Output System) stores system hardware settings that
are needed for system startup in the Mini PC.
In normal circumstances, the default BIOS settings apply to most conditions
to ensure optimal performance. Do not change the default BIOS settings
except in the following circumstances:
•
An error message appears on the screen during the system bootup and
requests you to run the BIOS Setup.
•
You have installed a new system component that requires further BIOS
settings or update.
WARNING! Inappropriate BIOS settings may result to instability
or boot failure. We strongly recommend that you change the BIOS
settings only with the help of a trained service personnel.
ASUS Mini PC PB Series
25