4. Pull the Smart Fix extedn levers at same time to push the child seat as far back
as it will go. Make sure the back of child seat is against the backrest of vehicle
seat firmly. (6-E)
5. Follow the steps in section 7 'Securing your child ' to finish the installation.
Unfastening your child seat
To unfastening your child seat,please pull the Smart fix release buttons on both
sides.
7. SECURING YOUR CHILD
IMPORTANT:
- Before securing your child in the child seat, please make sure the headrest is
adjusted to the correct position (see section 4.2).
- Check your vehicle's manual to see if your vehicle is equipped with ISOFIX lower
anchorages; choose one method of installation in the vehicle, either section 5 or
6 was followed correctly.
1. Have your child sit down in the child seat, and slide the diagonal belt guide
locking piece to open it. Pull out the safety belt and guide it to in front of your
child to the seat buckle. (7-A)
• ENGLISH •
INSTALLATION IN THE VEHICLE
6-A
6-D
22
6-B
6-E
6-C