Read this manual carefully before using this product. Heed the instructions to keep your warranty for this
product. Prevent fire or electric shock. This product may only be repaired by qualified
servicing personnel.
Keep this manual for future reference
-
Keep the original packaging in case of defects. Return the product in its original packaging.
-
Consult a professional before installing this product.
-
This product contains high-voltage parts; NEVER open the housing!
-
Never pull the power cord while disconnecting it from the mains socket. Remove the power
cord by pulling the connector.
-
Never connect or disconnect the power cord with wet hands.
-
If the connector or the power cord is damaged; they need to be replaced (or repaired) by a
qualified serviceman.
-
If the housing is damaged in such away so you can see internal parts, you may NEVER
connect the power cord with the mains socket and you may NEVER switch the product on.
Please contact your dealer if this situation occurs.
-
This product may only be repaired by qualified servicing personnel.
-
Only connect this product with a 230VAC / 50Hz earthed power supply.
Don't install this product near heat sources like radiators etc. Don't install on vibrating
-
surfaces.
-
Always disconnect this product during thunderstorms. Also disconnect this product when not
in use for a long period of time.
-
Water vapour might occur at first use after a long period of not using this product. Please let
the product reach room temperature before using it.
-
Never use this product outdoors or in a wet environment.
-
To prevent accidents in professional environments; please heed instructions and guidelines at
all times.
-
Keep this product out of reach of children.
Don't use cleaning spray to clean this product. Remainders of cleaning sprays are responsible
-
for the build-up of dust and grease. Please contact a servicing company when this product is
malfunctioning.
-
Please clean your hands before using this product.
Don't use excessive force while controlling this product.
-
-
Place this product on a stable and a evened surface.
-
NEVER look directly in the projection lens.
-
Only power this product off when the fan stops blowing; the lamp may blow during abrupt
shutdowns – this may cause fire or electric shock.
-
NEVER touch the grille or bottom part of the housing because of heated airflows.
-
Clean the air filter at least once a month and NEVER look directly into the air filter during
operation.
-
Never clean this product with chemical solutions. This might damage the paint. Use a dry cloth
instead.
-
Install out of the way of electronic devices that might cause humming malfunctions with this
product.
-
Only use identical servicing parts when servicing this product. Irreparable damages or
radiation might occur.
-
Turn this product of before disconnecting it from the mains power supply. Remove the power
cord and other connection cables before (re)moving this product.
Don't damage the power chord by stepping on it. NEVER install this product across walking
-
routes.
This product requires a 230VAC / 50Hz power supply. Please inform if you're mains supply
-
meets these specifications. When you use this product abroad, please inform if the mains
supply meets the above requirements.
This marking means that this product operates on a highly dangerous voltage. By touching
the internal, electrical parts you risk suffering an electric shock which might result in harmful
damage to you or others in the direct area.
This marking means that it's very important to read and heed the instruction manual at all times.
ENGLISH