Disposal Of Packaging Materials; Inserting/Changing The Remote Control Batteries; Charging The Battery - Kompernass QC 360 A1 Mode D'emploi

Disposal of packaging materials

The packaging protects the appliance from damage during transport.
The packaging materials have been selected for their environmental friendliness
and ease of disposal, and are therefore recyclable.
Returning the packaging into the material cycle conserves raw materials and
reduces the amount of waste generated. Dispose of packaging materials that are
no longer needed in accordance with applicable local regulations.
♦ If possible, keep the appliance's original packaging during the warranty period
so that the appliance can be packed properly for return shipment in the event of
a warranty claim.

Inserting/changing the remote control batteries

♦ Loosen the screw of the battery compartment cover on the bottom
of the remote control using a Phillips screwdriver.
♦ Remove the battery compartment cover.
♦ Insert the AAA/micro batteries in the battery compartment
(ensure correct polarity!).
♦ Replace the battery compartment cover and screw it down firmly.

Charging the battery

♦ Connect the USB charging cable
connect the two-pin charging connector to the connector on the battery. The USB
charging indicator light turns OFF. The charging time is around 40 minutes.
♦ The USB charging indicator light turns ON when the battery is fully charged.
■ 8 │ GB │ IE
to a USB port on a running computer and
QC 360 A1