Publicité
Les langues disponibles
Les langues disponibles
11. Never point an air tool at oneself or any other person. Serious injury
could occur.
12. Check air hoses for weak or worn condition before each use. Make sure
all connections are secure.
13. Keep all nuts, bolts and screws tight and ensure equipment is in safe
working condition.
14. Do not put hands near or under moving parts.
15. Always secure workpiece in a vise or clamp. Do not place hands on the
black cylinder or spring retainer when operating the tool.
can occur if the hammer is not secure.
16. Risk of electrical shock: this tool is conductive. Do not hammer into walls
containing live electrical wiring.
work motions can cause injury to hands and arms. Stop using any tool if
discomfort, numbness, tingling, or pain occur, and consult a physician.
during first few seconds of operation after an airtool has been lubricated.
Failure to cover exhaust port can result in serious injury.
Release all pressure from the system before
attempting to install, service, relocate or perform
any maintenance.
The spring retainer must be used to hold the chisel
in place. Personal injury can occur if the chisel is not
secure.
The quick connect retainer or spring retainer must be
used to hold the hammer in place. Personal injury
Do not misuse this product. Excessive exposure to
vibration, work in awkward positions, and repetitive
This air tool requires lubrication before initial use
and before and after each additional use.
Disconnect air tool from air supply before
lubricating.
Cover exhaust port with a towel before applying air
pressure. Oil will discharge through exhaust port
7
Publicité
