Publicité
Les langues disponibles
Les langues disponibles
V4.0
OPERATION
The air filter can be operated directly using the control panel or with the remote control.
TURN ON THE AIR FILTER AND SPEED SETTING
1.
Plug the power cord into an appropriate power source.
2.
Press the ON/Speed button (1) on the control panel or the remote control to power on
the air filter. The air filter will be running at low speed. The LO LED will light, indicating
that the unit has been working at low speed.
3.
Press the ON/Speed button (1) again to change the speed. The LEDs (2) next to the
ON/Speed button on the control panel indicate the selected speed - high, medium, or
low.
SET THE TIMER
A timer allows you to set the length of time (1, 2, 4 hours and clear the timer) that the air filter
will operate before shutting off automatically. The air filter timer can be set with the remote
control only.
1.
Press the TIME button (5) on the remote control to start the timer. The cycle is 1 hour,
2 hours, 4 hours and clear the timer.
2.
Press the TIME button (5) on the remote control to set the timer. The LEDs (4) on the
control panel indicate the amount of time selected.
Note: the unit will shut off automatically after the selected time interval elapses. When you
choose clear the timer, the air filter will keep running until turning it off.
TURN OFF THE AIR FILTER
To turn off the air filter, press the OFF button on the control or on the remote control.
8
400 CFM Air Cleaner
(FIG. 3 AND 4)
AIR FILTRATION
SYSTEM
1H
2H
4H
OFF
H
HD
LO
ON SPEED
FIG. 3
For technical questions call 1-800-665-8685
(FIG. 3 AND 4)
OFF
ON SPEED
TIME
8643405
FIG. 4
Publicité
