Publicité
Les langues disponibles
Les langues disponibles
8643405
SPECIFIC SAFETY RULES FOR AIR FILTERS
1.
To reduce the risk of injury, unplug the air filter from the power source before
changing filters or servicing.
2.
If mounting the air filter to the ceiling:
a.
Make sure the bottom of the air filter is at least 7' above the floor.
b.
Make sure the air filter is anchored to a building structure that is capable of
supporting a minimum of 100 lbs.
c.
Do not mount the air filter to non-structural elements such as drywall, false
ceiling panels, etc.
3.
Position the air filter so that it is at least 3' from a corner and from any heating or
cooling vents.
4.
Do not use the air filter in environments that have volatile fumes or smoke. This air
filter is designed and intended for the filtration of airborne wood dust only.
5.
Do not expose the air filter to water or rain. Do not use in damp environments.
6.
Do not duct a power tool or machine directly into the air filter.
ELECTRICAL INFORMATION
GROUNDING INSTRUCTIONS
IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path of least
resistance for electric current and reduces the risk of electric shock. This tool is equipped with
an electric cord that has an equipment grounding conductor and a grounding plug. The plug
MUST be plugged into a matching outlet that is properly installed and grounded in accordance
with ALL local codes and ordinances.
DO NOT MODIFY THE PLUG PROVIDED. If it will not fit the outlet, have the proper outlet
installed by an electrician.
IMPROPER CONNECTION of the equipment grounding conductor can result in electric shock.
The conductor with the green insulation (with or without yellow stripes) is the equipment
grounding conductor. If repair or replacement of the electric cord or plug is necessary, DO NOT
connect the equipment grounding conductor to a live terminal.
CHECK with a licensed electrician or service personnel if you do not completely understand the
grounding instructions, or if you are not sure if the tool is properly grounded.
USE ONLY THREE-WIRE EXTENSION CORDS that have 3-pronged plugs and outlets that accept
the tool's plug as shown in Fig. A. Repair or replace a damaged or worn cord immediately.
CAUTION: In all cases, make certain the outlet in question is properly grounded. If you are
not sure if it is, have a licensed electrician check the outlet.
WARNING: This unit is for indoor use only. Do not expose to rain or use in damp locations.
Visit www.princessauto.com for more information
400 CFM Air Cleaner
1.
3-pronged plug
2.
grounding prong
3.
properly grounded outlet
FIG. A
V4.0
5
Publicité
