Télécharger
Partager
Imprimer la page
  1. Manuels
  2. Marques
  3. Lifetime Manuels
  4. Rangement extérieur
  5. 60209
  6. Instructions d'assemblage

Lifetime 60209 Instructions D'assemblage

Masquer les pouces

Publicité

Liens rapides

Télécharger ce manuel
VERTICAL
STORAGE SHED
MODEL #60091
MODEL 60209
BEFORE ASSEMBLY:
• Assemble on a level surface
• 3 people are recommended for setup
• Videos and help guides available
Scan the code below to see how it all comes
together.
http://go.lifetime.com/vscplaylist
For customer service in the United Kingdom and continental Europe:
É-mail: cs@lifetimeproducts.eu
FOR DOMESTIC OUTDOOR USE ONLY!
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
TOOLS REQUIRED
Electric Drill
QUESTIONS?
CONTACT LIFETIME CUSTOMER SERVICE:
Call: 1-800-225-3865
7:00 am–5:00 pm (Monday–Friday) MST
and 9:00 am–1:00 pm Saturday MST
ADC #2 Phillips Bit
(Included)
Live Chat: www.lifetime.com
(click on "Ask An Expert" tab)
Video Instructions:
www.youtube.com/lifetimeproducts
ASSEMBLY INSTRUCTIONS
Pour le français, voir la page 2. Para el español, ver la página 3.
FRS 1/4" (6,4 mm) Drill Bit
(Included)
ARA 1/8" (3,2 mm) Drill Bit
(Included)
MODEL# AND PRODUCT ID
Model Number: 60209
Product ID:
TABLE OF CONTENTS
Icon Legend...................................................4
Warnings & Notices......................................5
Parts Identifi er..............................................6
Floor & Wall Assembly..................................7
Door Assembly.............................................23
Shed Anchoring...........................................42
Cleaning & Care..........................................46
Registration..............................................47
Warranty....................................................48
(you will need both when contacting us)

Publicité

loading

Manuels Connexes pour Lifetime 60209

Sommaire des Matières pour Lifetime 60209

  • Page 1 ADC #2 Phillips Bit ARA 1/8" (3,2 mm) Drill Bit (Included) (Included) Electric Drill QUESTIONS? CONTACT LIFETIME CUSTOMER SERVICE: MODEL# AND PRODUCT ID Call: 1-800-225-3865 Live Chat: www.lifetime.com (you will need both when contacting us) (click on “Ask An Expert” tab) Model Number: 60209 7:00 am–5:00 pm (Monday–Friday) MST...
  • Page 2 Phillips n° 2 (Incluse) Perceuse électrique ® QUESTIONS ? CONTACTER AUX SERVICES À LA CLIENTÈLE LIFETIME t’Chat en direct: www.lifetime.com N° DE MODÈLE ET RÉFÉRENCE DU PRODUIT Composer le 1-800-225-3865 (il faut avoir les deux lorsque vous nous contactez) (cliquer sur la languette « Ask An Expert ») N°...
  • Page 3 ARA 1/8 in (3,2 mm) Broca (Incluida) (Incluida) Taladro eléctrico ¿PREGUNTAS? ® PÓNGASE EN CONTACTO CON LOS SERVICIOS DE CLIENTES LIFETIME Chat en vivo: www.lifetime.com MODEL E ID DEL PRODUCTO Llamar : 1-800-225-3865 (necesitará los dos al contactarnos) Número de modelo: 60209 (cliquez en la lengüeta «Ask An Expert»)
  • Page 4 ICON LEGEND / LÉGENDE DES ICÔNES / LEYENDA DE ÍCONOS • Indicates special heed should be taken when reading. • Indique qu’une attention spéciale doit être pretée à la lecture. • Indica que uno debe prestar atención al leer. • Indicates the parts to be used for a section. •...
  • Page 5 WARNINGS & NOTICES / AVERTISSEMENTS ET AVIS / ADVERTENCIAS Y AVISOS TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS English: • Failure to follow these warnings may result in serious injury or property damage and will void warranty. •...
  • Page 6 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS Plastic Parts / Pièces en plastique Piezas de plástico AGQ (x1) ANC (x1) AGZ (x1) ANA (x2) AGN (x1) AGY (x1) AGO (x1) Metal Parts / Pièces en métal Piezas de metal FEI (x1) FEJ (x2) Holes /...
  • Page 7 FLOOR & WALL ASSEMBLY / ASSEMBLAGE DU PLANCHER ET DES PORTES / ENSAMBLE DEL PISO Y LAS PUERTAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Blister Pack / Blister Blíster EXO (x8) ADV (x14) ADZ (x26) ADW (x10) CHK (x2) ADC (x1) AHS (x2) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS...
  • Page 8 • En caso de tener problemas con esta sección, seguir el código debajo para ver un video sobre el ensamble de esta sección. http://go.lifetime.com/vscfloorwallroof • Lay the Left Side Wall Panel (AGN) face down on level ground, and insert a Wall Square Tube (FEJ) (one with just two holes—one at each end) into the bottom of the Panel until a few inches hang out the bottom.
  • Page 9 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHS (x2) • Insert an End Cap (AHS) into the end of the Tube, and continue inserting the Tube until the Cap is flush with the bottom of the Panel.
  • Page 10 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Lay the Floor Panel (ANC) down on level ground, and insert the three center tabs at the bottom of the Right Wall Panel (AGY) into the slots in the Floor panel.
  • Page 11 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Fold the edges of the Panel. Tilt the Panel to locate the end tabs over the slots in the Floor Panel. Insert the tabs into the slots. •...
  • Page 12 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Insert the three tabs at the bottom of the right Rear Wall Panel (ANA) into the 2nd, 3rd, and 4th slots from the right corner of the Floor panel.
  • Page 13 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) • Align the six holes along the edges of the Panels, and secure the Panels together with six (6) Screws (ADZ).
  • Page 14 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) • Insert the three tabs at the bottom of the second Rear Wall Panel (ANA) into the 2nd, 3rd, and 4th slots from the left corner of the Floor panel.
  • Page 15 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) 1.10 • Repeat steps 1.4–1.6 for the Left Side Wall Panel (AGN). • Répéter les étapes 1.4 – 1.6 pour le panneau mural latéral gauche (AGN).
  • Page 16 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADW (x10) ARA (x1) 1.11 • Flip the assembly on its back, and insert a Screw (ADW) through each of the tabs underneath the Floor Panel as shown.
  • Page 17 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) 1.12 • Stand the assembly upright. Align the holes in the Support Channel (FEF) with those along the groove between the two Rear Wall Panels.
  • Page 18 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • One edge of the Roof Panel has six (6) small holes along a thick border as indicated below. This edge goes at the front of the cabinet, just above the Doors.
  • Page 19 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADV (x6) 1.13 • Orient the Roof Support (FEI) as shown, and set it against the front edge of the Roof Panel. Insert six (6) Screws (ADV) to secure it in place.
  • Page 20 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS EXO (x8) 1.14 • Flip the assembly upright, and set the Roof Panel down onto the Wall Panels being sure to orient the Panel so the metal Roof Support is over the opening.
  • Page 21 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS CHK (x2) ADZ (x2) 1.15 • Secure the Roof Support to the right Side Wall Panel using one (1) screw (CHK) and one (1) screw (ADZ) as shown. The screw (CHK) is self-tapping (it has the tip of a drill bit).
  • Page 22 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADV (x8) 1.16 • Secure the Roof Panel to the right Side Wall Panel using four (4) Screws (ADV) at the places indicated. Insert the Screws at an angle. Repeat this step for the left Side Wall Panel.
  • Page 23 DOOR ASSEMBLY / ASSEMBLAGE DES PORTES / ENSAMBLE DE LAS PUERTAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Small Parts & Hardware Box / Boîte de petites pièces et quincaillerie Caja de piezas pequeñas y herraje Hardware Bag / Sac de quincaillerie Bolsa de herraje Blister Pack /...
  • Page 24 DOOR ASSEMBLY / ASSEMBLAGE DES PORTES / ENSAMBLE DE LAS PUERTAS PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico AGO (x1) AGZ (x1) TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO ADC (x1) FRS (x1) 7/16 in/po...
  • Page 25 • En cas d’avoir des problèmes avec cette section, suivre le code en bas pour voir un vidéo sur l’assemblage de cette section. • En caso de tener problemas con esta sección, seguir el código debajo para ver un video sobre el ensamble de esta sección. http://go.lifetime.com/vscdoor LEFT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE GAUCHE / ENSAMBLE DE LA PUERTA IZQUIERDA •...
  • Page 26 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) • Set the Lateral Door Channel (FEM) into the groove along the edge of the Door, and align the four holes indicated. •...
  • Page 27 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AEE (x3) ADW (x1) BYZ (x2) • Connect two Handle Pieces (BYS & BYR) together. • Joigner deux pièces de la poignée (BYS et BYR) l’une l’autre. •...
  • Page 28 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS DXW (x6) DWJ (x3) • These Screws (DXW) go through the Hinge, Door, and through the holes in the Channel. Start with the center Hinge. •...
  • Page 29 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) RIGHT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE DROITE / ENSAMBLE DE LA PUERTA DERECHA •...
  • Page 30 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Using a 1/4" (6,4 mm) bit, drill just into these two divots—but not completely through the Door. •...
  • Page 31 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHS (x1) 2.10 • Insert a Square Tube (FEK) into the hole at the bottom of the Door until it hangs out a few inches. •...
  • Page 32 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 2.12 • Now, drill completely through the Door and Square Tube using the 1/4" (6,4 mm) bit. Use the holes in the Square Tube as a guide.
  • Page 33 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po 11 mm BQP (x2) ACA (x2) AAB (x4) AEB (x4) FGN (x1) EDA (x1) 2.13 •...
  • Page 34 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AEE (x3) ADW (x1) BYZ (x2) 2.14 • Connect two Handle Pieces (BYS & BYR) together. •...
  • Page 35 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS DXW (x6) DWJ (x3) 2.16 • These Screws (DXW) go through the Hinge, Door, and through the holes in the Channel. Start with the center Hinge. •...
  • Page 36 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADC (x1) DUL (x6) 2.17 • Align the holes in the hinges on the Right Door with the divots on the Right Wall Panel, and secure the Door to the Cabinet using six (6) Screws (DUL).
  • Page 37 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS DUL (x6) 2.18 • Repeat the last step for the Left Door. • Répéter l’étape précédente pour la porte gauche. •...
  • Page 38 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po 11 mm 2.19 • Close the Doors and, if necessary, raise or lower the Left Door Latch Bracket to align it with the Latch. Hold it in place, and open the Left Door and tighten the two (2) Nuts.
  • Page 39 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 2.20 • Open the Left Door. Set the Left Door Inner Channel (FEL) in the groove along the edge of the Door, and align the six (6) holes along the Channel with the six (6) divots in the Door.
  • Page 40 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) 2.21 • While holding the Channel tight against the Door, insert six (6) Screws (ADZ) to secure the Channel in place. •...
  • Page 41 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADC (x1) CHK (x4) ARA (x1) 2.22 DGS (x1) DGR (x1) • Secure a Deadbolt (DGR & DGS) to the top and bottom of the Door at the locations shown. You can drill first and then insert the Screws.
  • Page 42 SHED ANCHORING / ANCRAGE DE LA REMISE / ANCLAJE DE LA CASITA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje COB (x2) ADW (x2) FHK (x2) ACB (x2) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO ARA (x1) ADC (x1)
  • Page 43 u SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADW (x2) FHK (x2) • Attach the Wall Brackets to the back of the Roof at the following locations: •...
  • Page 44 u SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS COB (x2) ACB (x2) ARA (x1) • Drill holes in the wall, and gently tap the Screw Anchors (COB) into the holes until flush with the wall. If drilling directly into studs, do not use the anchors.
  • Page 45 NOTES / REMARQUES / NOTAS...
  • Page 46 CLEANING & CARE Congratulations on your Lifetime product purchase. By following the instructions below, your new Lifetime product should provide you with years ® of service and enjoyment. The polyethylene panels are stain and solvent resistant. Most stains can be removed using a mild soap and a soft-bristled brush.
  • Page 47 REGISTER today! ENREGISTRER CE PRODUIT EN LIGNE À WWW.LIFETIME.COM Chez Lifetime®, nous nous engageons à fournir des produits innovateurs de qualité. Lors de votre inscription, vous aurez l’occasion de nous faire parvenir vos commentaires. Votre opinion est importante pour nous.
  • Page 48 THE MANUFACTURER RESERVES THE RIGHT TO MAKE SUBSTITUTIONS TO WARRANTY CLAIMS IF PARTS ARE UNAVAILABLE OR OBSOLETE. 1. Lifetime vertical storage sheds are warranted to the original purchaser to be free from defects in material or workmanship for a period of fi ve years from the date of original retail purchase. The word “defects” is defi ned as imperfections that impair the use of the product.
  • Page 49 2. Cette garantie n’est pas transférable et est expressément limitée à la réparation ou au remplacement du produit défectueux. Si le produit est déclaré défectueux selon les termes de cette garantie, Lifetime Products, Inc. réparera ou remplacera les parties défectueuses gratuitement pour l’acheteur. Les frais d’expéditions aller et retour de l’usine ne sont pas couverts et sont à la charge de l’acheteur.
  • Page 50 6. Esta garantía se otorga en reemplazo expreso de toda otra garantía, expresa o implícita, incluidas las garantías de comercialización o adaptación para el uso en la medida permitida por las leyes federales y estatales. Ni Lifetime Products, Inc., ni ninguno de sus representantes asume ninguna otra responsabilidad en conexión con este producto. Esta garantía le otorga derechos legales específi cos, y usted puede tener otros derechos que varían de estado a estado...
  • Page 51 IMPORT INFORMATION / IMPORTATIONS / INFORMACIÓN DE IMPORTACIONES Distributed by: Imported by / Importé par : Costco Wholesale Corporation Costco Wholesale Canada Ltd.* 415 W. Hunt Club Road P.O. Box 34535 Seattle, WA 98124-1535 Ottawa, Ontario K2E 1C5, Canada 1-800-774-2678 1-800-463-3783 www.costco.com www.costco.ca...
  • Page 52 7:00 am–5:00 pm (M–F) MST and 9:00 am–1:00 pm Saturday MST (English) ® AMÉLIORER VOTRE ACHAT LIFETIME EN AJOUTANT DES ACCESSOIRES OU DES AUTRES PRODUITS Pour acheter des accessoires ou des autres produits Lifetime , visiter le : ® www.lifetime.com Ou composer au 1-800-424-3865 Du lundi au vendredi 7 h –...