Connecting/Disconnecting - Panasonic CF-VEB181AU Mode D'emploi

Connecting/Disconnecting

Connecting
CAUTION
Do not connect or disconnect the port replicator while the computer is powered on or
in the standby or hibernation mode.
1
Turn off the computer, and disconnect all cables from
the computer.
2
Connect the plug of the AC adaptor that came
with the computer to the DC-IN jack of the
port replicator and plug the other end into an
AC outlet.
CAUTION
Do not use other than the specified AC adaptor (Model No. CF-AA1623A (CF-
18), CF-AA1633A (CF-19)) and AC cord.
Refer to the "Operating Instructions" accompanying computer for information
on proper handling of the AC adaptor and AC cord.
3
Detach the strap's buckle.
4
Firmly close all covers at the rear side of the computer.
5
Turn the computer over, and open the cover for the ex-
pansion bus connector of the computer.
E
Buckle
9