Panasonic CF-VEB181AU Mode D'emploi page 11

CAUTION
Do not attempt to move the port replicator when it is connected to the computer.
Hold down the bottom of the computer when opening
the display. If you open the display without holding
down the bottom of the computer, the computer may
be disconnected from the port replicator.
Do not turn the display while the computer is connected to the port replicator.
Set the port replicator up on a flat surface. Setting up the port replicator on an uneven
surface can result in poor contact.
Do not use the port replicator in a location where it will be subject to vibration, such as
while riding a bike, motorcycle, or car. The computer may disconnect from the port
replicator and malfunction as a result.
If the computer malfunctions while the port replicator is connected, refer first to the
"Dealing with Problems (Advanced)" or "Troubleshooting (Advanced)" in the
computer's "Reference Manual". If you still are unable to solve the problem, turn off
the computer, disconnect the port replicator (
the computer, and check to see if the computer operates normally. If the computer
operates normally, the port replicator may be malfunctioning. Contact Panasonic Tech-
nical Support.
page 12), connect the AC adapter to
E
11