Mienta CH-174 Mode D'emploi page 3

Before using your appliance, you must familiarize yourself with the different
components of your appliance. Every letter corresponds to one of the components
of your appliance.
Components
A. Motor base
B. Start button (speed 1 and 2 )
C. Bowl cover
D. Lower blade
E. Upper blade
F. Milkshake accessory
G. Graduated bowl
D
Before the first use
- Clean the bowl, the bowl cover, the blades and the shaker accessory using warm water with dish washing liquid.
You may put them in the dishwasher.
- For the motor unit, use a damp cloth to wipe it. Do not wash it in water or pass it under running water.
Using your appliance
1. Take the motor base (A) and the bowl cover (C) off and put the graduated bowl
(G) onto a stable, dry and clean working surface. Make sure the appliance is not
connected to the power supply before you start.
2. Make sure that the lower blade (D) is correctly positioned on the circle in the middle
of the container. Fit the upper blade (E) on top of the lower blade. Fill the container
with the desired food to chop. Do not overfill the bowl (maximum: 0.5 liter). For best
results, you must cut the food into smaller pieces.
NB: Depending on your recipe, you may use the lower blade alone.
3. Fit the bowl cover (C) in place. The appliance will not work if the bowl cover is not
fitted correctly.
4. Place the motor base (A) onto the covered bowl and connect the appliance to a
wall socket. You may then press the start button (B). Please note that a mild press
will operate in speed 1 while a stronger press will operate speed 2. To stop the
operation, release the pressure off the start button and the appliance will stop.
5. In the case of wet or damp food, it is best to press briefly several times to get the
best results.
6. Always take the plug out of the socket before removing the motor base.
7. Take out the blade (D) before emptying the container. Beware: the blades are
very sharp and can cause serious injury. Kindly exercise caution when
handling them.
E
F
B
A
C
G