Velleman CAMCOLVC5 Notice D'emploi page 4

•
DO NOT use this product to violate privacy laws or perform other
illegal activities.
4. Features
•
for audio and video recording
•
2GB integrated flash memory
•
only one operation switch
•
USB 2.0 plug and play device
•
USB cable included
5. Operation
Recording
•
Point the camera [1] towards the field of interest.
•
Press the control button [5] once. The status LED [4] turns on
orange to indicate that the device is ready.
•
Press the control button [5] again. The status LED [4] turns on
blue to indicate that the device is recording. The recorded format
is .AVI.
•
Press the control button [5] again to stop recording. The LED [4]
turns orange again. Note that this might take a few seconds.
•
Press and hold the control button [5] for ±3s to switch the
device off.
Play back
•
Hold the camera part of the device and turn the pen part counter
clockwise.
•
Insert the USB connector [3] into a USB port of a computer (not
incl.). When necessary, use the included USB extension cable.
•
The status LED [4] will light up orange and the device will now
act as a regular USB memory stick. Copy, open or delete the
recordings as you would with other files on your computer
system.
Charging
•
The battery charges when the device is connected to a powered
USB port.
Reset
•
When the device does not react anymore, use a small pin (e.g. a
paper clip) to gently press the reset-button [6].
6. Battery
•
This recorder contains an internal rechargeable battery. When the
device is end-of-life, this battery has to be removed.
20.08.2009
CAMCOLVC5
4 ©Velleman nv