Built-in CD Player
Playing a CD
1
These are the basic steps necessary to play a
CD with your built-in CD player. More ad-
vanced CD operation is explained starting on
the next page.
1 EQ indicator
Shows which equalizer curve is selected.
2 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
3 Track number indicator
Shows the track currently playing.
1
Press OPEN to open the front panel.
CD loading slot appears.
# After a CD has been inserted, press SOURCE
to select the built-in CD player.
2
Insert a CD into the CD loading slot.
Playback will automatically start.
CD loading slot
# You can eject a CD by pressing EJECT.
# To avoid a malfunction, make sure that no
metal object comes into contact with the term-
inals when the front panel is open.
2
3
4
Rotate it to increase or decrease the volume.
3
5
press and hold c or d.
# If you select ROUGH, pressing and holding c
or d enables you to search every 10 tracks in the
current disc. (Refer to Selecting the search meth-
od on page 17.)
6
track, press c or d.
Pressing d skips to the start of the next track.
Pressing c once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
! The built-in CD player plays one standard, 12-
! Do not insert anything other than a CD into
! If you cannot insert a disc completely or if
! If an error message such as ERROR-11 is dis-
! When a CD TEXT disc is inserted, the disc and
EJECT button
Close the front panel.
Use VOLUME to adjust the sound level.
To perform fast forward or reverse,
To skip back or forward to another
Notes
cm or 8-cm CD at a time. Do not use an adap-
ter when playing 8-cm CDs.
the CD loading slot.
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press EJECT to eject the disc, and check the
disc for damage before inserting it again.
played, refer to Understanding built-in CD
player error messages on page 43.
track titles begin to scroll to the left auto-
matically.
Section
05
15
En