PSI Woodworking Products PKMUSXX Mode D'emploi

#PKMUSXX
Music Twist Pen Kit
Kit Features:
• Easy to turn with straight tubes
• Minimum parts - easy to assemble
• Available in multiple fi nishes
• Overall Length: 5-1/2"
• Uses standard Parker® style refi lls
• Tube size: 8mm
Required Accessories:
• 7mm Pen Mandrel
• Drill Bit: 8mm #PKPARK-8MM
• Bushing set(3 pc): #PKMUSBU
• Barrel Trimming set: #PKTRIM8
• Live Tailstock Center
• 2 Part Epoxy Glue or Insta Cure (Cyanoacrylate) Glue
• Pen Blank: Minimum Size - 3/4"
Tip
Spring
Preparing the Blank:
• Cut 2 blanks to the length of the tubes and add 1/16" for squaring off.
• Drill 8mm holes lengthwise through the blanks.
• Spread glue over the tube(s), insert the blank with a twisting motion to spread the glue evenly inside.
• Center the tubes lengthwise inside the blanks.
• When the glue is dry, square the ends of the blanks. Use a 8mm barrel trimmer, or a universal pen blank squar-
ing jig with a power disc sander. Take the excess material down fl ush with the ends of the brass tube. (do not trim
beyond the length of the tube since this may interfere with operation of the mechanism and assembly). Use a barrel
trimmer to clean the inside of the tube.
x 3-1/2" Long
DIAGRAM A / PARTS LAYOUT DIAGRAM A / PARTS LAYOUT
Coupler/Band
1.435" 1.435"
Refi ll
Twist Mechanism Twist Mechanism
NOTE: When assembling, do not press directly on the
threads
PSI Woodworking Products PSI Woodworking Products
Cap Nut
1.76"
Clip Clip
Cap