Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
6. To install fixture on studs in a ceiling or a wall:
use wood screws (DD).
Hardware Used
DD
Wood Screws
7. To install fixture on drywall or in a wall:
Use plastic anchors (EE) and wood screws (DD).
Hardware Used
DD
Wood Screws
EE
Plastic Anchors
8. Identify ground sides of supply connector (B) and
track section (F).
Insert supply connector (B) into track section (F) and
twist to secure.
Make sure the ground side of supply connector (B) aligns
with the ground side of track section (F).
Note: The ground side of supply connector (B)
is the side with the two metal tabs.
Note: The ground side of the track section (F)
has an indented groove on the face of
the two internal copper bars.
Note: The ground side of the supply connector (B)
must be aligned with the ground side of the track
section (F) to complete assembly.
9. Tighten support screws (D).
Install cover (C) and secure with screws (E).
10. Identify ground sides of track head assembly (G) and
track section (F).
Insert track head assembly (G) into track section (F).
Pull down the spring clip (H) and twist to secure.
Note: The ground side of track head assembly (G)
Is the side with the two metal tabs.
Note: The ground side of the
indented groove on the face of the two internal copper bars.
Note: The track head assembly (G) must be aligned with
the ground side of the track section (F) to complete assembly.
x 2
x 2
x 2
track section (F) has an
6
7
8
Track Ground:
Groove Indentation
Connector Ground:
2 Metal Tabs
9
D
C
10
F
G
Track Head Ground:
2 Metal Tabs
Lowes.com/portfolio
7
DD
F
F
EE
DD
F
B
E
Track Ground:
Groove Indentation
H
Publicité
