Zavor Select Manuel D'utilisation page 27

(1)
3. Turn the lid over and place it on a table top. Pull out the anti-locking case.
Using a brush or toothpick, check and remove any food or foreign particles
that may be lodged in the floating valve. Replace the anti-locking case by
pressing down.
4. Replace the pressure regulator knob by lining the CLEAN dot with the dot on
the lid of the unit and turning clockwise until it goes into place. The white dot
on the base of the pressure regulator should line up with the PRESSURE or
STEAM setting on the pressure regulator knob. If it doesn't, remove the knob
again and try realigning the dots the other way around.
ZAVOR Select Manual.indd Sec2:25 ZAVOR Select Manual.indd Sec2:25
(2)
(5)
25
(3)
(4)
6/25/2018 4:56:10 PM 6/25/2018 4:56:10 PM