Safety Rules; Functional Description; Intended Use; Product Features - Bosch GMB 32 PROFESSIONAL Instructions D'emploi

OBJ_BUCH-260-001.book Page 9 Wednesday, October 11, 2006 8:22 AM

Safety Rules

Read all safety warnings and
WARNING
instructions provided with the drill
stand and the drill. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future ref-
erence.
The term "drill" in the warnings refers to your mains-
operated (corded) drill or battery-operated (cordless)
drill.
Pull the plug from the socket outlet and/or
remove the battery before carrying out adjust-
ments on the power tool or replacing acces-
sory parts. Unintentional starting of drills is the
cause of some accidents.
Assemble the drill stand properly before
mounting the drill. The correct assembly is impor-
tant in order to ensure proper function.
Before using, fasten the drill securely to the
drill stand. An unsecured drill in the drill stand can
lead to loss of control.
Fasten the drill stand onto a firm, plane and
level surface. If the drill stand can slip away or
wobble, then the drill can not be guided evenly and
securely.
When drilling overhead or on surfaces that
are not horizontal, secure the drill stand with
a safety chain. In case of a power failure or exces-
sive load, the holding force of the magnet is not
maintained. The drill stand can fall down and cause
accidents.
Connect the drill stand to a properly earthed
mains supply. The socket outlet and the extension
cable must be equipped with an operative protec-
tive conductor.
Keep the connection cable of the drill away
from the working area. Damaged or entangled
cables increase the risk of an electric shock.
Maintain the drill stand with care. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the function of the drill stand.
Have damaged parts repaired before using
the drill stand. Many accidents are caused by
poorly maintained devices.
Have your drill stand serviced/repaired only
by a qualified repair person using original
replacement parts. This will ensure that the safety
of the device is maintained.
The safety warnings and working instructions
for the drill as well as for the drilling tools and
accessories being used are to be strictly
observed!
1 609 929 K50 • 11.10.06

Functional Description

Read all safety warnings and all
instructions. Failure to follow the warn-
ings and instructions may result in electric
shock, fire and/or serious injury.
While reading the operating instructions, unfold the
graphics page of the drill stand and leave it open.

Intended Use

In conjunction with the GBM 32-4 drill, the drill stand is
intended for precision drilling in magnetic materials
such as steel.
Other drills may not be used, as these cannot be fas-
tened sufficiently safe.
The drill stand can be used horizontally, vertically as
well as overhead. It must be observed that the mount-
ing surface on the magnetizable material (thickness
>8 mm) is sufficient for the transmission of the mag-
netic force.

Product Features

The numbering of the illustrated product features refers
to the representation of the drill stand on the graphics
page.
1 Drilling lever with drilling-depth scale
2 Screw for the side holder
3 Side holder for drill
4 Drill fixture
5 Screw for drill fixture
6 Motor On/Off switch
7 Socket outlet for drill
8 Magnet On/Off switch
9 Safety chain
The accessories illustrated or described are not
included as standard delivery.

English | 9