Assembly - MW TOOLS CAT180 Mode D'emploi

M1.1.CAT180.NLFREN - 02022018
TOOLS
EN

3 Assembly

Assembly accessories:
1. Lay down the cabinet. Connect the 2 support legs (23) with the cabinet using 4 M12 screws and flat washers.
2. Attach the leg reinforcement (22) to the support legs (23) using 2 M10 screws and flat washers.
3. Attach the 4 foot pads (24) to the bottom of the support legs (23).
4. Turn over the machine and adjust the height of the foot pads.
5. Tighten all fasteners.
20