Palona QUUBI Mode D'emploi page 45

Shows details of the current system Including:
SW Version: Software version number
Radio ID: Unique code used to identify this particular radio device.
Friendly name: (name by which the radio is identified on a network).
5.10 Backlight
The QUUBI display can be set to dim, when in Standby, after a
Timeout period. This option allows you to set the timeout period and the
brightness settings before (On level) and after (Dim level) the timeout
period.
For the On level, High, Medium and Low
For the Dim level, Medium, Low and Off
5.11 Multi-room
A QUUBI audio device can form part of a Multi-room group. The
group can be controlled over a Wi-Fi network with QUUBI unit's user
interface. In Multi-room QUUBI devices can be set up as a group with
one device acting as the server and up to four other devices acting as
clients.
5.11.1 View details
Displays Multi-room details for the QUUBI device including the name
of group and whether it is a server or client within the group
5.11.2 Create new group
Allows you to create and name a new speaker group.
5.11.3 Add to group
Enables you to add available speaker units to the current group to
which the QUUBI device belongs.
5.11.4 List current clients
If this unit is acting as the Server for a group, this option lists the
client units in the group.
5.11.5 Leave group
- 15 -