Allied Vision Goldeye CL Guide De Démarrage Rapide page 18

Camera Link status LED All manuals and user guides at all-guides.com
The Camera Link status LED is located directly below the Camera Link connector.
• Green-red (1 Hz periodic flashing): Booting
After powering up the camera, the LED indicates the boot phase with a
periodic green-red flashing.
• Green-red (1 Hz periodic flashing): Firmware update
A firmware update in progress is indicated with a periodic green-red flashing.
• Green (steady): Idle
A steady green light indicates that the camera is idle and ready.
• Green-red (non-periodic fast flashing): Transmission
During transmission of image data, the LED toggles between red and green.
Traffic on the serial control channel is shown by additional irregular fast
green-red flashing. This may cause the LED to appear amber colored.
Note the temperature status LED has no relevance for the initial startup of the
camera.
15