Publicité
HINGE ADJUSTMENT SUPPLEMENT
In the event that the door does not align
properly, the INSIDE machine screws located
on the hinges are for adjusting slightly to the left
or rihgt. DO NOT LOOSEN THE OUTSIDE
MACHINE SCREW FOR ADJUSTMENT.
1. To adjust the door toward the OUTSIDE of
the unit, turn the inside machine screws to
the LEFT, or COUNTERCLOCKWISE (Fig.
In the event that the door does not align properly, the INSIDE Machine Screws located on the Hinges
A).
are for adjusting slightly to the Left or Right.
FOR ADJUSTMENT.
2. To adjust the door toward the INSIDE of the unit, turn the inside machine scrrews to the RIGHT, or
CLOCKWISE (Fig. B).
A. To adjust the door toward the OUTSIDE of the unit, turn the Inside Machine Screws to the LEFT, or
COUNTERCLOCKWISE. (See Figure A)
note:
B. To adjust the door toward the INSIDE of the unit, turn the Inside Machine Screws to the RIGHT, or
Please be patient. It may take several minutes to adjust properly.
CLOCKWISE. (See Figure B)
Only once the door is in the desired position, fully tighten the OUTSIDE machine screws. This will ensure that the
*Note: Please be patient, it may take several minutes to adjust properly.
door is secure.
Only once the door is in the desired position, fully tighten the OUTSIDE Machine Screws. This will
ensure that the door is secure.
Fig. A
A
Fig. B
B
HINGE ADJUSTMENT SUPPLEMENT
OUTSIDE MACHINE SCREW
INSIDE MACHINE SCREW
DO NOT LOOSEN THE OUTSIDE MACHINE SCREW
In the event that the door does not align properly, the INSIDE Machine Screws located on
are for adjusting slightly to the Left or Right.
FOR ADJUSTMENT.
A. To adjust the door toward the OUTSIDE of the unit, turn the Inside Machine Screws to t
COUNTERCLOCKWISE. (See Figure A)
B. To adjust the door toward the INSIDE of the unit, turn the Inside Machine Screws to the
CLOCKWISE. (See Figure B)
*Note: Please be patient, it may take several minutes to adjust properly.
Only once the door is in the desired position, fully tighten the OUTSIDE Machine Screws. T
ensure that the door is secure.
Need to adjust the top
part of the door toward
OUTSIDE of the unit.
A
You may also need to adjust slightly the lower part of the
door toward INSIDE of the unit at the same time.
Need to adjust the top
part of the door toward
INSIDE of the unit.
B
You may also need to adjust slightly the lower part of the
door toward OUTSIDE of the unit at the same time.
HINGE ADJUSTMENT SUPPLEMENT
OUTSIDE MACHINE SCREW
INSIDE MACHINE SCREW
DO NOT LOOSEN THE OUTSIDE MAC
Need to adjust the top
part of the door toward
OUTSIDE of the unit.
You may also need to adjust slightly the lower part of th
door toward INSIDE of the unit at the same time.
Need to adjust the top
part of the door toward
INSIDE of the unit.
You may also need to adjust slightly the lower part of the
door toward OUTSIDE of the unit at the same time.
assembly
EN
DOOR
DOOR
13
W415-3057 / 05.18.21
Publicité
Chapitres
