Toolland VL4001 Mode D'emploi page 5

5. Overview
Refer to the illustrations on page 2 of this manual.
1 screw
2 handle
3 ram stroke control lever
4 splitter column
5 handle
6 operation handle
7 motor
8 main body column
9 oil input plug
10 wheel
11 working table
6. Assembly
6.1 Assembly of the Handle Guards
V. 02 – 09/11/2015
VL4001
12 feet
13 lock plate for working table
14 cutter
15 handle guard
16 log catching claw
17 switch
18 oil pipe
19 oil tank
20 axis
21 protective arches
1. Assemble the handle guards. Unscrew the
hexagonal bolt [22] with an appropriate wrench.
Feed the service arm [24] into the switching
cradle [25]. Tighten the hexagonal bolt to such
an extent that the service arm can be moved.
2. Connect the other service arm according to the
described method.
3. The protective arches [26] on both handle guards
are always assembled using two bolts with cross
groove [27].
5 ©Velleman nv